Planning information

A mat should always be in a frame that is fitted flush with the floor.

For Top Clean mats for entrance areas, always indicate the profile length and the direction of traffic.

When ordering a system frame with mat or tray with mat, please state the external frame size. We deduct approx. 10 mm from this for the exact mat size.

If you already have an angle frame, please indicate the clear inside dimensions of the frame. We will deduct approx. 5 mm to calculate the production size for the mat.

For large-size entrance areas, mats with a profile length of more than 300 cm and/or a weight of more than 50 kg should be divided, as they will otherwise be too bulky or too heavy for installation and maintenance.

When installing angle frames or wells in outdoor areas, drainage should be provided so that water can drain away (e.g. by making an opening in the screed), or the mat well should be connected to the drainage system.

The Top Clean TREND® mat in the 10 and 17-mm versions can be equipped with a ramped edge so that a well is not required for any subsequent relaying.

For entrance areas with heavy traffic (airports, supermarkets, shopping centres etc.) we recommend our aluminium profile mats Top Clean STABIL, Top Clean OBJEKT and Top Clean HIGH, which meet these special requirements.

For special designs we recommend a weather-resistant and durable PVC template.

Roll up the template, never fold it. The upper side of the template and the walking direction must be marked. Only with these exact specifications can a dimensionally accurate entrance mat be made.